top of page

Small (pocket) size with multiple display functions including; total Battery Voltage, per Cell Voltage, battery pack peak voltage and battery pack lowest voltage.

Backlight 128 x 64 LCD and Buzzer Tone Reminder.

CellLog 8S can not only measure 2-8 cell Lithium Cell batteries, but also measure NiMH, NiCd, Pb
Overall battery packs voltage.

Various Alarm Options are available. Voltage Alarm, Pack Voltage Alarm, Overvoltage Alarm, Low Voltage Alarm, Differential Voltage Alarm and Time Over Alarm. An extra alarm output can be linked and controlled by the users. With a set of 8 default monitor alarm settings, which can be selected for different battery packs.

CellLog 8S has been 100% calibrated before it enters into the market. Calibration settings can also be changed and altered by the user.

CellLog 8S has a 16Mbit flash storage, which can log offline data in 36 hours @2 seconds logging interval.

Celllog 8S is firmware upgradable using USB port and a PC.

CellLog 8S supports logview software. Logview allows user to plot and analyse all relevant battery data. More information on LogView software is available at


Lithium (LiPo/LiIo/LiFe) Battery Cell Count: 2 – 8 series
Pack Voltage Range: 4.0 – 43.0VDC
Alarm Pack Voltage Range: 0.1 – 4.3VDC
Cell voltage Range: 1.3 – 4.9VDC
Alarm Cell Voltage Range: 1.3 – 4.9VDC
Voltage Display Resolution: 1mV
Current Loading Of Test: 8mA
Maximum Voltage For Alarm Port: 50VDC
Current Drain For Alarm Port: <500mA
Log Files Storage: 16 Mbit (36 Hours)
Sample Logging Time Interval: 2 seconds
PC Connect: USB port
Weight: 18g
Dimensions (L X W X D) 62mm x 39mm x 12mm
Log Files Storage: 16Mbit (33 hours@2 seconds interval)
Sample Logging Time Interval: 0.25 – 3600 second
PC Connect: USB port
Weight: 29g
Dimensions (L X W X D): 85mm x 40mm x 13mm

Download CellLog 8s User Manual

CellLog 8S

SKU: I8s
Out of Stock
  • 12 Months Manufacturer Warranty

bottom of page